AGGREGATES:
CODE NO.
|
DESCRIPTIONS
|
IS: 383-1970
|
Specification for coarse and fine aggregates from natural sources of concrete
|
IS: 650-1966
|
Specification for standards of sand for testing of cement
|
IS: 2386-1963 (Part 1)
|
Methods of test for aggregates of concrete
|
IS: 2386-1963 (Part 2)
|
Estimation of deleterious materials and organic impurities
|
BUILDING STONES:
CODE NO.
|
DESCRIPTIONS
|
IS: 1121-1974 (Part 1)
|
Methods of test determination of strength properties of natural building stones – Part-I Compressive Strength
|
IS: 1121-1974 (Part 2)
|
Methods of test determination of strength properties of natural building stones – Part-II Transverse Strength
|
IS: 1121-1974 (Part 3)
|
Methods of test determination of strength properties of natural building stones – Part-III Tensile Strength
|
IS: 1121-1974 (Part 4)
|
Methods of test determination of strength properties of natural building stones – Part-IV Shear Strength
|
IS: 1122-1974
|
Methods of test determination of true specific gravity of natural building stones
|
IS: 1123-1975
|
Method of identification of natural building stones
|
IS: 1124-1974
|
Methods of test determination of water absorption, apparent specific gravity and porosity of natural building stones
|
IS: 1125-1974
|
Methods of test determination of weathering of natural building stones
|
IS: 1126-1974
|
Method of test for durability of natural building stones
|
IS: 1128-1974
|
Specifications for lime stone slabs
|
IS: 1130-1969
|
Specifications for marbles (blocks, slabs, and tiles)
|
BRICKS, TILES AND OTHER CLAY MATERIALS:
CODE NO.
|
DESCRIPTIONS
|
IS: 654-1972
|
Mangalore pattern clay roofing tiles
|
IS: 777-1961
|
Specification for glazed earthenware tiles
|
IS: 1077-1976
|
Specification for common burnt clay building bricks
|
IS: 1237-2006
|
Cement concrete flooring tiles
|
IS: 1464-1969
|
Specification for ridge and ceiling tiles
|
IS: 2117-1975
|
Guide for manufacture of handmade common building bricks
|
IS: 2180-1970
|
Specification for heavy duty brunt clay building bricks
|
IS: 2222-1970
|
Specification for brunt clay perforated building bricks
|
IS: 2690-1975 (Part 1)
|
Specification for brunt clay flat terracing bricks
|
IS: 2690-1972
|
Specification for brunt clay facing tiles
|
IS: 3102-1971
|
Specification for burnt clay solid bricks
|
IS: 3367-1975
|
Specification for burnt clay bricks for use in lining irrigation and drainage works
|
IS: 3461-1966
|
PVC (vinyl) asbestos floor tiles
|
IS: 3496-1976
|
Method of tests for burnt, clay building tiles
|
IS: 3583-1976
|
Specification for paving bricks
|
IS: 3951-1975
|
Specification for hollow clay tiles for floor and roofs
|
IS: 3952-1978
|
Specification for burnt clay hollow blocks for walls and partitions
|
IS: 3978-1967
|
Code for practice for manufacture of brunt clay mangalore pattern roof tiles
|
IS: 4139-1989
|
Specification for sand lime bricks
|
IS: 4805-1978
|
Guide for construction of bricks kilns
|
IS: 4885-1968
|
Specification for sewer bricks
|
IS: 5454-1978
|
Methods of sampling of clay building
|
IS: 5779-1970
|
Bricks burnt clay soiling bricks
|
IS: 6165-1971
|
Dimensions for special shapes of clay bricks
|
REINFORCEMENT AND STRUCTURAL STEEL:
CODE NO.
|
DESCRIPTIONS
|
IS: 432-1966 (Part 1)
|
Specification for mild steel and medium tensile bars
|
IS: 1566-1966
|
Specification for hard brawn steel wire fabric for concrete reinforcement
|
IS: 1786-2008
|
High strength deformed steel bars and wires for concrete reinforcement
|
IS: 226-1969
|
Specification for structural steel
|
IS: 808-1964
|
Specification for rolled steel beam, channel and angle sections
|
IS: 811-1965
|
Specification for cold formed light gauge structural steel sections
|
ASPHALT, TAR AND BITUMEN:
CODE NO.
|
DESCRIPTIONS
|
IS: 73-1961
|
Paving Bitumens
|
IS: 217-1961
|
Cutback Bitumens
|
IS: 334-1965
|
Glossary of term relating to bitumens and tar
|
IS: 3117-1965
|
Bitumens emulsion for road (Anionic type)
|
IS: 8887-1978
|
Bitumens emulsion for roads (Cationic type)
|
IS: 424-1965
|
Plastic asphalt
|
IS: 215-1961
|
Road tar
|
PAINTS AND VARNISHES:
CODE NO.
|
DESCRIPTIONS
|
IS: 427-1965
|
Specification for distemper, dry, colour as required
|
IS: 428-1953
|
Specification for distemper, oil emulsion, colour as required
|
IS: 5410-1969
|
Specifications for cement paint, colour as required
|
IS: 101-1964
|
Method of test for ready mixed paints and enamels
|
IS: 102-1962
|
Specifications for ready mixed paint brushing, red lead, non setting, priming
|
IS: 103-1962
|
Specifications for ready mixed paint, brushing, white led for priming for use on aluminum and light alloys
|
IS: 104-1962
|
Specifications for ready mixed paint, brushing, zinc chrome, priming for use on aluminum and light alloys
|
IS: 106-1962
|
Specification for ready mixed paint, brushing, priming for enamels for use on wood
|
IS: 155-1950
|
Specification for ready mixed paint, brushing matt black for use on wood
|
IS: 156-1950
|
Specification for ready mixed paint, brushing for use on floor, colours as required
|
IS: 158-1968
|
Specification
for ready mixed paint, IS brushing, bituminous, black, lead free, acid,
alkali, water and heat resisting, for general purposes
|
IS: 162-1950
|
Specification for ready mixed paint, IS brushing, fire resisting, silicates types for use on wood, colour as required
|
IS: 290-1961
|
Specification for coal tar black paint
|
IS: 1477-1971 (Part 1&2)
|
Painting of ferrous metals in buildings
|
IS: 2524-1968 (Part 1&2)
|
Painting of non-ferrous metals in buildings
|
CEMENT AND CONCRETE:
CODE NO.
|
DESCRIPTIONS
|
IS: 269-1989
|
Specification for ordinary portland cement, 33 grade
|
IS: 383-1970
|
Specification for coarse and fine aggregates from natural sources for concrete
|
IS: 455-1989
|
Specification for portland slag cement
|
IS: 456-2000
|
Code of practice for plain and reinforced concrete
|
IS: 457-1957
|
Code of practice for general construction of plain and reinforced concrete for dams and other massive structures
|
IS: 516-1959
|
Method of test for strength of concrete
|
IS: 650-1991
|
Specification for standard sand for testing of cement
|
IS: 1199-1959
|
Methods of sampling and analysis of concrete
|
IS: 1343-1980
|
Code of practice for prestressed concrete
|
IS: 1344-1981
|
Specification for calcined clay pozzolana
|
IS: 1489-1991 (Part 1)
|
Specification for portland pozzolana cement- Fly ash based
|
IS: 1489-1991 (Part 2)
|
Specification for portland pozzolana cement- Calcined clay based
|
IS: 1727-1967
|
Methods of test for pozzolanic materials
|
IS: 2430-1986
|
Methods for sampling of aggregates for concrete
|
IS: 2502-1963
|
Code of practice for bending and fixing of bars for concrete reinforcement
|
IS: 2645-003
|
Integral waterproofing compound for cement mortar and concrete- specification
|
IS: 2770-1967 (Part 1)
|
Methods of testing bond in reinforced concrete- Pull-out test
|
IS: 3085-1965
|
Methods of test for permeability of cement mortar and concrete
|
IS: 3370
|
Code of Practice for concrete structures for storage of liquids
|
IS: 3370-2009 (Part 1)
|
General requirements
|
IS: 3370-2009 (Part 2)
|
Reinforced concrete structures
|
IS: 3370-1967 (Part 3)
|
Prestressed concrete
|
IS: 3370-1967 (Part 4)
|
Design tables
|
IS: 3466-1988
|
Specification for masonry cement
|
IS: 3535-1986
|
Methods of sampling hydraulic cement
|
IS: 3558-1983
|
Code of practice for use of immersion vibrators
|
IS: 3812-2003
|
Specification for pulverized fuel ash
|
IS: 3812-2003 (Part 1)
|
For use as pozzolana in cement, cement mortar and concrete
|
IS: 3812-2003 (Part 2)
|
For use as admixture in cement mortar and concrete
|
IS: 4031
|
Methods of physical tests for hydraulic cement
|
IS: 4031-1996 (Part 1)
|
Determination of fineness by dry sieving
|
IS: 4031-1999 (Part 2)
|
Determination of fineness by specific surface by Blaine air permeability method
|
IS: 4031-1988 (Part 3)
|
Determination of soundness
|
IS: 4031-1988 (Part 4)
|
Determination of consistency of standard cement paste
|
IS: 4031-1988 (Part 5)
|
Determination of initial and final setting times
|
IS: 4031-1988 (Part 6)
|
Determination of compressive strength of hydraulic cement (other than masonry cement )
|
IS: 4031-1988 (Part 7)
|
Determination of compressive strength of masonry cement
|
IS: 4031-1988 (Part 8)
|
Determination of transverse and compressive strength of plastic mortar using prism
|
IS: 4031-1988 (Part 9)
|
Determination of heat of hydration
|
IS: 4031-1988 (Part 10)
|
Determination of drying shrinkage
|
IS: 4031-1988 (Part 11)
|
Determination of density
|
IS: 4031-1988 (Part 12)
|
Determination of air content of hydraulic cement mortar
|
IS: 4031-1988 (Part 13)
|
Measurement of water retentivity of masonry cement
|
IS: 4031-1989 (Part 14)
|
Determination of false set
|
IS: 4031-1991 (Part 15)
|
Determination of fineness by wet sieving
|
IS: 4032-1985
|
Method of chemical analysis of hydraulic cement
|
IS: 4305-1967
|
Glossary of terms relating to pozzolana
|
IS: 4634-1991
|
Methods for testing performance of batch type concrete mixers
|
IS: 4845-1968
|
Definitions and terminology relating to hydraulic
|
IS: 4926-2003
|
Ready mix concrete- Code of practice
|
IS: 5512-1983
|
Specification for flow table for use in test of hydraulic cement and pozzolanic materials
|
IS: 5513-1996
|
Specification for vicat apparatus
|
IS: 5514-1996
|
Specification for apparatus used in Le-Chatelier test
|
IS: 5515-1983
|
Specification for compaction factors apparatus
|
IS: 5516-1996
|
Specification for variable flow type air permeability apparatus (Blaine type )
|
IS: 5525-1969
|
Recommendation for detailing of reinforcement in reinforced concrete works
|
IS: 5536-1969
|
Specification for constant flow type air permeability apparatus (Lea and Nurse type)
|
IS: 5816-1999
|
Method of test for splitting tensile strength of concrete
|
IS: 6452-1989
|
Specification for high alumina cement for structural use
|
IS: 6461
|
Glossary of terms relating to cement concrete
|
IS: 6461-1972 (Part 1)
|
Concrete aggregates
|
IS: 6461-1972 (Part 2)
|
Materials (other than cement and aggregates)
|
IS: 6461-1972 (Part 3)
|
Concrete reinforcement
|
IS: 6461-1972 (Part 4)
|
Types of concrete
|
IS: 6461-1972 (Part 5)
|
Formwork for concrete
|
IS: 6461-1972 (Part 6)
|
Equipment, tool and plant
|
IS: 6461-1973 (Part 7)
|
Mixing, laying, compacting, curing, and other constructions aspects
|
IS: 6461-1973 (Part 8)
|
Properties of concrete
|
IS: 6461-1972 (Part 9)
|
Structural aspects
|
IS: 6461-1973 (Part 10)
|
Test and testing apparatus
|
IS: 6461-1973 (Part 11)
|
Prestressed concrete
|
IS: 6461-1973 (Part 12)
|
Miscellaneous
|
IS: 6491-1973
|
Method of sampling fly ash
|
IS: 6909-1990
|
Specification for super sulphate cement
|
IS: 6925-1973
|
Methods of test for determination of water soluble chloride in concrete admixtures
|
IS: 7246-1974
|
Recommendations for use of table vibrators for consolidating concrete
|
IS: 7320-1974
|
Specifications for concrete slump test apparatus
|
IS: 7325-1974
|
Specifications for apparatus for determining constituents of fresh concrete
|
IS: 7861
|
Code of practice for extreme weather concreting
|
IS: 7861-1975 (Part 1)
|
Recommended practice for hot weather
|
IS: 7861-1981 (Part 2)
|
Recommended practice for cold weather concreting
|
IS: 8041-1990
|
Specification for rapid hardening portland cement
|
IS: 8042-1989
|
Specification for white portland cement
|
IS: 8043-1991
|
Specification for hydrophobic portland cement
|
IS: 8112-1989
|
Specification for 43 grade ordinary cement
|
IS: 8125-1976
|
Dimensions and materials of cement rotary kilns, compositions and auxiliaries
|
IS: 8142-1976
|
Method to test for determining setting time of concrete by penetration resistance
|
IS: 8229-1986
|
Specification for oil well cement
|
IS: 8425-1977
|
Determination of specific surface area of powders by air permeability
|
IS: 9012-1978
|
Recommended practice for shotcreting
|
IS: 9013-1978
|
Method of making, curing and determining compressive strength of accelerated cured concrete test specimens
|
IS: 9103-1999
|
Specification for admixture for concrete
|
IS: 9142-1979
|
Specification for artificial light weight aggregate for concrete masonry units
|
IS: 9284-1979
|
Method of test for abrasion resistance of concrete
|
IS: 9376-1979
|
Specification for apparatus for measuring aggregate crushing value and 10% fines
|
IS: 9377-1979
|
Specification for apparatus for aggregate impact
|
IS: 9399-1979
|
Specification for apparatus for flexural testing of concrete
|
IS: 9459-1980
|
Specification for apparatus for use in measurement of length change of hardened cement paste, mortar and concrete
|
IS: 9799-1981
|
Specification for pressure meter for determination of air content of freshly mixed concrete
|
IS: 10070-1982
|
Specification for machine for abrasion testing of coarse aggregates
|
IS: 10078-1982
|
Specification for jolting apparatus for testing
|
IS: 10079-1982
|
Specification for cylindrical metal measures for use in test of aggregates and concrete
|
IS: 10080-1982
|
Specification for vibration machine for casting- standard cement mortar cubes
|
IS: 10086-1982
|
Specification for mould for use in test of cement and concrete
|
IS: 10262-2009
|
Guideline for concrete mix proportioning
|
IS: 10510-1983
|
Specification for vee-bee consistometer
|
IS: 10850-1984
|
Specification for apparatus for measurement of water retentivity of masonry cement
|
IS: 10890-1984
|
Specification for planetary mixer used in test for cement and pozzolana
|
IS: 11262-1985
|
Specification for calorimeter for determination of heat of hydration of hydraulic cement
|
IS: 11263-1985
|
Specification for cylinder measure for determination of air content of hydraulic cement
|
IS: 11578-1986
|
Method for determination of specific surface area of powder and porous particle using low temperature gas absorption techniques
|
IS: 11993-1987
|
Code of practice for use of screed board concrete vibrators
|
IS: 12089-1987
|
Specification for graduated slag for manufacture pf portland slag cement
|
IS: 12119-1987
|
General requirement for pan mixers for concrete
|
IS: 12269-1987
|
Specification for 53 grade ordinary portland
|
IS: 12303-1987
|
Criteria for design of RCC hinges Dec
|
IS: 12330-1988
|
Specification for sulphate resisting portland
|
IS: 12423-1988
|
Method for colorimetric analysis of hydraulic
|
IS: 12600-1989
|
Specification for low heat portland cement
|
IS: 12803-1989
|
Methods of analysis of hydraulic cement by x-ray fluorescence spectrometer
|
IS: 12813-1989
|
Method of analysis of hydraulic cement by atomic absorption spectrometer
|
IS: 12870-1989
|
Methods of sampling calcined clay pozzolana
|
IS: 13311-1992 (Part 1)
|
Methods of non destructive testing of concrete- Ultrasonic pulse velocity
|
IS: 13311-1992 (Part 2)
|
Method of non destructive testing of concrete- Rebound hammer
|
IS: 14345-1996
|
Specification for autoclave apparatus
|
IS: 14687-1999
|
Guideline for false work for concrete structures
|
IS: 14858-2000
|
Requirements for compression testing machine used for testing of concrete and mortar
|
IS: 14959
|
Methods of test for determination of water soluble and acid soluble chlorides
|
IS: 14959-2001 (Part 1)
|
In fresh mortar and concrete
|
IS: 14959-2001 (Part 2)
|
In hardened mortar and concrete
|
IS: 15388-2003
|
Silica fume- Specification
|
SP:16-1980
|
Design aids for reinforced concrete to IS 456-1978
|
SP: 23-1982
|
Handbook on concrete mixes
|
SP: 24-1983
|
Explanatory handbook on IS code of practice for plan and reinforced concrete
|
SP: 34-1987
|
Handbook on concrete reinforcement and detailing
|
0 Comments: